Mr. Gasket Carb Adapter 2bbl-2bbl 1937MRG

Carburetor Adapter - 1/2 in Thick - Open - Holley 2-Barrel to Rochester 2-Barrel - Gasket / Hardware - Aluminum - Natural - Each

Mr. Gasket Carb Adapter 2bbl-4bbl 1933

Carburetor Adapter - 1 in Thick - Open - Holley 2-Barrel to Square Bore - Gasket / Hardware - Aluminum - Natural - Each

Mr. Gasket Carb Adapter 2bbl-Q-Jet 1929MRG

Carburetor Adapter - 1-1/8 in Thick - Open - Holley 2-Barrel to Spread Bore - Gasket / Hardware - Aluminum - Natural - Each

Mr. Gasket Carb Adapter Kit 4150 Qjet 6009

Carburetor Adapter - 1 in Thick - 4 Hole / Open - Square Bore to Spread Bore - Gasket / Hardware - Aluminum / Phenolic - Natural - Kit

Mr. Gasket Carb Adj. Fuel Line 1556G

Carburetor Fuel Line - 3/8 in Hose Barb Inlet - 5/8-18 in Dual Outlets - Adjustable - Braided Stainless - Chrome / Blue / Red - Holley 4150 / 4160 - Kit

Mr. Gasket Carb Heat Shield 3710

Carburetor Heat Shield - 1/2 in Thick - 4 Hole - Aluminum - Natural - Square Bore - Kit

Mr. Gasket Carb. Dissipator 1/2in Thick- Open Center 98A

Carburetor Spacer - Heat Dissipater - 1/2 in Thick - Open - Aluminum - Holley 3-Barrel / Ram Manifold - Kit

Mr. Gasket Carb. Dissipator 4-Bbl. 1/4in Thick- 4-Hole 97

Carburetor Spacer - Heat Dissipater - 1/4 in Thick - 4 Hole - Square Bore - Aluminum - Kit

Mr. Gasket Carb. Heat Dissipator 86B

Carburetor Spacer - Heat Dissipater - 1/2 in Thick - 4 Hole - Spread Bore - Aluminum - Kit

Mr. Gasket Carb. Linkage Bushing 6026

Throttle Linkage Bushing - 2 Piece - 1/2 in Mounting Diameter - Steel - Zinc Oxide - Holley Carburetors - Each

Mr. Gasket Carburetor Studs 1-1/2in 60

Carburetor Stud - 5/16-18 and 5/16-24 in Thread - 1.500 in Long - Hex Nuts - Steel - Zinc Oxide - Set of 4

Mr. Gasket Carburetor Studs 1-3/8in 59

Carburetor Stud - 5/16-18 and 5/16-24 in Thread - 1.375 in Long - Hex Nuts - Steel - Zinc Oxide - Set of 4

Mr. Gasket Carburetor Studs 2-1/2in 62

Carburetor Stud - 5/16-18 and 5/16-24 in Thread - 2.500 in Long - Hex Nuts - Steel - Zinc Oxide - Set of 4

Mr. Gasket Carburetor Studs 2in 61

Carburetor Stud - 5/16-18 and 5/16-24 in Thread - 2.000 in Long - Hex Nuts - Steel - Zinc Oxide - Set of 4

Mr. Gasket Carter Afb 1-7/16 Bore 57

Carburetor Base Plate Gasket - 4-Barrel - 4 Hole - Composite - Square Bore - Each