Moroso 1qt Breather Tank w/6an Inlet Black Polyethylene 85406

Breather Tank - 3-1/8 in Diameter x 10-1/2 in Tall - 6 AN Bulkhead Inlet - Petcock Drain - Breather Included - Plastic - Black - Each

Moroso 2 To 4bbl Carb Adapter 64966

Carburetor Adapter - 3/4 in Thick - 2 Hole - Holley 2-Barrel to Square Bore - Hardware Included - 1-11/16 in Bore - Billet Aluminum - Natural - Each

Moroso 24.0/5.0-15 DS-2 Front Drag Tire 17040

Tire - Drag Front - DS2 - 24.0 x 5.0-15 - Bias-Ply - 4 Ply Nylon - White Lettering - Each

Moroso 25' Red Plug Wire Sleeve 72002

Spark Plug Wire Sleeve - 7 mm-8 mm Wires - 25 ft - Fiberglass / Silicone - Red - Each

Moroso 25.25/5.50-15 Front Drag Tire 17050

Tire - Drag Front - Drag Special - 25.5 x 5.5-15 - Bias-Ply - 2 Ply Nylon - Each

Moroso 26.0/5.0-17 DS-2 Front Drag Tire 17029

Tire - Drag Front - DS2 - 26.2 x 5.0-17 - Bias Ply - 4 Ply Nylon - White Lettering - Each

Moroso 27.75/7.10-15 Front Drag Tire 17100

Tire - Drag Front - Drag Special - 27.7 x 7.1-15 - Bias-Ply - 2 Ply Nylon - Each

Moroso 28.0/4.5-15 DS-2 Front Drag Tire 17028

Tire - Drag Front - DS2 - 28.0 x 4.5-15 - Bias Ply - 4 Ply Nylon - White Lettering - Each

Moroso 28T Gilmer Vacuum Pump Pulley 64886

Vacuum Pump Pulley - Gilmer - 28 Tooth - 3/4 in Wide - 3 x 1-3/16 in 3-Bolt Pattern - Aluminum - Black Anodized - Universal - Each

Moroso 29.25/7.60-15 Front Drag Tire 17600

Tire - Drag Front - Drag Special - 29.2 x 7.6-15 - Bias-Ply - 2 Ply Nylon - Each

Moroso 2in Alum. Carb. Spacer 64970

Carburetor Spacer - 2 in Thick - Open - Square Bore - Cast Aluminum - Each

Moroso 2in Carb Spacer 64960

Carburetor Adapter - 2 in Thick - Open - Spread Bore to Square Bore - Cast Aluminum - Natural - Each

Moroso 2in Dominator Adapter 65000

Carburetor Adapter - 2 in Thick - Open - Dominator to Square Bore - Cast Aluminum - Natural - Each

Moroso 3 Quart Accumulator- 20-1/8in. x 4-1/4in. 23900

Oil Accumulator - 3 qt Capacity - 20-1/8 x 4-1/4 in - 1/2 in NPT Fitting / Shutoff - Aluminum - Natural - Each

Moroso 3-1/2 Carb Studs 37961

Carburetor Stud - Bullet Nose - 5/16-18 and 5/16-24 in Thread - 3.500 in Long - Steel - Zinc Oxide - Set of 4